MASCOT Silver Ring Production Process

Prepare materials

1. Silver chips or silver bars: Choose appropriate silver chips or silver bars as the production material.

2. Silver solder powder and flux: used in the soldering process.

3. Silver clay: Another method used to make silver rings.

4. Ring rod and rubber hammer: used for molding.

5. File and sandpaper: used for polishing.

6. Welding gun: used in the welding process.

7. Alum water: used for cleaning and polishing.

Production process

1. Design and measurement: Choose your favorite style, design the texture of the pattern, and measure the circumference.

2. Quenching: Quenching silver bars to make them soft and easy to shape.

3. Carving: Carving meaningful content on the side of the ring, using a small hammer and chisel to strike.

4. Bending: Bend the silver bar into the ring rod to establish the prototype of the ring.

5. Welding: Attach small welding pieces to the interface at both ends and use a welding gun for welding.

6. Polishing: Use machine or manual polishing to restore the natural color of silver jewelry.

Welding and polishing

1. Welding: Apply the mixed flux and silver solder powder to the welding area, and heat it with a welding gun until it melts.

2. Polishing: Use a polishing machine or hand polish to restore the luster of the ring.

3. Polishing: Use a file and sandpaper to polish the ring to make it smooth.

4. Cleaning: Boil the ring in alum water to remove impurities.

By following the above steps, a beautiful silver ring is completed.